一般小門市一臺復合機就可以了，墊片的也行，可調式的也可以，簡單實用，適合小批量加工生產，自給自足。

　　Generally, a laminating machine is sufficient in Xiaomen City, and gaskets and adjustable ones are also acceptable. They are simple and practical, suitable for small batch processing and production, and self-sufficient.

　　型材批發商和自己加工量大的就要兩臺機器，開齒穿條機一臺，復合機一臺【墊片式的可調式的都可以】加工出來的質量穩定，年產量100噸-2000噸型材。

　　For profile wholesalers and those with large processing volumes, two machines are needed: one toothed threading machine and one composite machine (adjustable with gasket type) to produce stable quality profiles with an annual output of 100-2000 tons.

　　如果年產量3000噸以下，就買兩臺開齒穿條機+一臺復合機【墊片式的可調式的任選其一】投資小，見效快。也可以選購一臺開齒機+一臺穿條機+一臺復合機【墊片式的可調式的任選其一】。斷橋鋁穿條設備，鋁型材發泡設備，開齒穿條機

　　If the annual output is less than 3000 tons, buy two toothed threading machines and one composite machine (adjustable with gasket type). The investment is small and the effect is fast. You can also choose one gear opening machine, one threading machine, and one laminating machine (adjustable with gasket type). Broken bridge aluminum threading equipment, aluminum profile foaming equipment, toothed threading machine

　　在以上前提下有能力的采購者也可以選用單軸數控復合機或者雙軸數控復合機，要求更高者可以選購五軸數控復合機。

　　Under the above conditions, capable purchasers can also choose single axis CNC composite machines or dual axis CNC composite machines, and those with higher requirements can choose five axis CNC composite machines.

　　至于復合機的類型還有傳動軸的和鏈條式的，如何選擇這其中一種就要看喜好了，傳動軸的引進國內較早，但是后來伴隨著使用中種種問題，后來使用鏈條式的越來越多，鏈條式的銷售比例高達百分之96以上。數控五軸復合機配合傳動軸的性能尤為突出，所以建議一般采購選用鏈條式的復合機，五軸數控的復合機一般選用傳動軸的復合機。

　　As for the types of composite machines, there are also transmission shaft and chain type. How to choose one of these depends on preference. The introduction of transmission shaft was earlier in China, but later accompanied by various problems in use, more and more chain type machines were used, and the sales proportion of chain type machines reached over 96%. The performance of the CNC five axis compound machine combined with the transmission shaft is particularly outstanding, so it is recommended to generally purchase chain type compound machines, and for five axis CNC compound machines, transmission shaft compound machines are generally selected.

　　本文由 開齒穿條機 友情奉獻.更多有關的知識請點擊  http://www.mybmiformula.com   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from the open tooth threading machine. For more related knowledge, please click http://www.mybmiformula.com Sincere attitude. We provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Please stay tuned